Nicros introduced our “real rock” product A.R.T.Wall™- (Advanced Rockwall Technology) to the industry in 1992.  In our continued commitment to product improvements, we identified the need for shorter onsite install times when surveying general contractors and architects. In fact, install time was their prime concern.  A Nicrolite™ climbing wall is fabricated in our shop and shipped in large pieces to the project site. By doing this, we have been able to reduce onsite installation time by 50% or more.  This not only decreases the time and mess a regular climbing wall project would produce, but also provides the customer with an eye catching showpiece that is sure to excite climbers of all abilities.

Nicrolite™ is made from a special fiberglass mixture that gives the product a “reel rock” look and texture.  The reason Nicrolite™ can be installed much faster than most climbing wall products is our ability to pre-manufacture the entire wall at our facility.  Once it has been fabricated, seamed, and embossed in our shop, it is broken down into sections. These sections allow for easy shipping. The wall is then delivered in pieces and reassembled back into the full climbing wall at your site.  Nicrolite™, like A.R.T.Wall™, has the versatility to allow for climbing on the natural features (those that are molded from real rock) or using the bolt-on handholds. There are about 3 available locations for handhold installation per every 4 square foot.

 

The Nicros Nicrolite GymWall is similar to Entre Prises (EP) Durastone, Entre Prises (EP) Cornerstone 3D, Eldorado High Performance, Rockwerx Gym Rock, and Everlast Combi Walls.

Nicrolite™ is the best “real rock” product for your time-sensitive project.  It can be installed virtually anywhere inside or outdoors.  The climbing wall surface is made of a lighter weight fiberglass to the standard GFRC products which enables Nicrolite™ to be used in applications that may have flooring weight restrictions, such as second floor mezzanines. Nicrolite™ is also custom-designed to fit operational needs or installation parameters desired for the particular project.

 

 

Nicrolite™ looks, climbs and feels just like real rock.  Nicrolite™ castings are molded from real rock (NOT HAND CARVED!).  This “real rock” look, along with our special texture, gives Nicrolite™ projects the best look and feel in the industry.

Nicrolite™ is molded and contains many natural climbable features as well as the ability to add modular handholds.  All walls come with 1 modular hold per 3-4 square feet of climbing surface to get you started.  Generally, you can place a handhold in 3-4 different places every 4 square feet of climbing wall.  Nicros has over 1,500 handholds shapes to choose from to add to your wall in

Nicrolite™ has enough texture to be able to smear and flag against, and it’s not super smooth like other competitor products. At the same time, it isn’t so abrasive that it shreds skin, should a climber fall and slide against it.

 

The Nicrolite™ climbing wall components are pre-built and delivered to the job site in a nearly finished state.

Nicrolite™ costs, on average, about $70-$100 per square foot.  Because Nicrolite™ can be installed much quicker than most climbing wall systems, there is potential for savings. This savings varies depending on the size and scope of the work; please call for more details. Even though the cost of a Nicrolite™ climbing wall may seem similar to other wall products in our line, the real savings will be actualized in the shorter overall project schedule. The shorter climbing wall construction time will allow other sub-contractors (flooring, painting, electrical) in that area, which contributes to the shorter overall project schedule. In practice, general contractors and architects will realize the benefit of the decreased onsite installation time to the overall project schedule.